Serving Racine · Kenosha · Mount Pleasant · Caledonia · Pleasant Prairie · Somers · Burlington Free measured quotes · (262) 800-4671

September 19, 2026 · 7 minute read

What Seamless Gutters Cost in Racine and Kenosha (2026)

Gutters are one of the few exterior jobs you can price from your kitchen table. The cost is linear feet multiplied by a per-foot rate, plus a handful of extras. Once you know the rate for your material and roughly how many feet you have, you can tell whether a quote is fair before the installer has left the driveway.

These figures are typical for Racine and Kenosha counties in 2026. They are ranges, not anyone's price list, and your written quote is what counts.

The short answer

Most homes here pay between $1,600 and $3,900 for a full set of seamless aluminum gutters with downspouts. A single-story ranch sits at the low end. A two-story with a complicated roofline sits at the top. Standard 5-inch aluminum runs about $9 to $14 a foot installed.

Per-foot prices by material

Installed prices, including hangers, corners and end caps. Downspouts are sometimes folded in and sometimes listed separately, so check how your quote handles them.

Material and profileTypical installed priceExpected life
5-inch K-style seamless aluminum$9 – $14 per ft20 – 30 years
6-inch K-style seamless aluminum$11 – $17 per ft20 – 30 years
Aluminum half-round$14 – $22 per ft20 – 30 years
Galvanized or painted steel$12 – $26 per ft15 – 25 years, longer if kept painted
Copper, half-round or K-style$28 – $50 per ft50 years and up
Commercial 7-inch box gutter$18 – $30 per ft25 years and up

How to measure your own house

You do not need a ladder. Walk the outside of the house with a tape or a measuring wheel and measure along the ground under each eave that has, or should have, a gutter. Gable ends, where the roof comes to a peak, do not get gutters, so skip those walls.

Add it up and you have your linear footage. Then count downspouts and note the height of each. A rough guide: a 1,200-square-foot ranch has 140 to 170 feet of gutter. A 2,200-square-foot two-story has 180 to 220 feet.

Two worked examples

These use mid-range figures so you can see how a quote is built.

Line itemWest Racine ranchPleasant Prairie two-story
Gutter160 ft of 5-inch at $11 = $1,760200 ft of 6-inch at $14 = $2,800
Downspouts4 x 10 ft of 2x3 at $9 = $3606 x 20 ft of 3x4 at $12 = $1,440
Second-story premiumNone120 ft at $2 = $240
Tear-off and haul-away160 ft at $1.50 = $240200 ft at $1.50 = $300
Typical totalAbout $2,360About $4,780

What moves the number

Five things account for nearly all the difference between one quote and another.

  • Height. Second-story work adds a dollar to three dollars a foot. Third-story eaves on the older lakefront homes add more, and can require a lift.
  • Corners. Every inside and outside corner is cut, fitted and sealed by hand. A simple rectangle has four. A modern two-story can have twenty.
  • Fascia condition. Rotted boards found after tear-off have to be replaced before anything new is hung. Budget $8 to $20 a foot for the affected lengths. See soffit and fascia repair.
  • Size and gauge. Moving from 5-inch to 6-inch gutters adds about $2 to $3 a foot. Heavier .032 aluminum adds another dollar or two.
  • Job size. Small jobs cost more per foot, because the truck, the machine and the crew show up either way. Most crews have a minimum somewhere between $400 and $600.

What a fair quote includes

Ask for these in writing. A quote that lists them is a quote you can compare.

  • Linear feet of gutter and the profile, size and gauge of the aluminum
  • Number, size and length of downspouts
  • Hanger type and spacing. You want hidden hangers at 24 inches or closer.
  • Whether tear-off and haul-away are included
  • A per-foot price for fascia replacement if rot turns up
  • Warranty terms on both material and workmanship, in writing from the installing contractor

Where the savings are, and are not

Late fall and winter are the slow season, and some crews price more keenly then. Combining jobs helps too. Adding the garage, or having gutter guards fitted on the same visit, spreads the setup cost.

The false economy is sectional gutter from a home center. The material is cheaper and the joints will leak within a few winters. In this climate the seams are the whole problem, which is what the seamless gutters page explains.

Prices in this guide are typical 2026 ranges for Racine and Kenosha counties, not a quote. The exact figure for your house comes from a free measured quote.


Common questions

Why do quotes for the same house vary so much?

Usually because they are not for the same thing. One includes downspouts and tear-off and one does not, or one is .027 gauge on spikes and another is .032 on hidden hangers. Line the quotes up item by item before comparing totals.

Is there a charge for a quote?

No. Measuring and quoting are free, and there is no obligation to go ahead.

Do gutters add value to a house?

They protect value more than they add it. What buyers and inspectors notice is the damage from not having them: stained siding, rotted fascia, eroded beds and a damp basement.


All guides

Get the house measured and priced

Send a few details or call. A local, insured gutter crew will measure your eaves and give you a written quote. No charge, no obligation.

Call Free quote